Glue Dots adhesives are a double-sided, pressure-sensitive dot of glue that bond instantly to virtually any surface.

Glue Dots are faster and safer than glue guns, cleaner than liquid glue, and leaves none of the sticky residue of double-sided tapes.

Yes! Glue Dots are non-toxic and odorless, and they conform to ASTM D-4236 standards.

Warning:  choking hazard – small parts.  Not for children under 3 years old.

To apply Glue Dots from a roll, press the item to be adhered against the adhesive and peel away from the liner. Press the item into place. 

To apply Glue Dots from sheets, tear at the perforations and peel the tabs apart. Place the tab with the adhesive onto a surface and press firmly.  

To apply Glue Dots from the Dot N Go Dispenser, center the Glue Dot on the nose roller using the wheel, press the nose firmly to the surface, while holding it at a 45 degree angle, and pull dispenser toward you in a slow and controlled motion to dispense the dot. For details view the How to Apply Glue Dots video (add link).

Glue Dots are designed to create a permanent bond to most surfaces, such as paper. To remove Glue Dots from hard or non-porous surfaces, first try lifting it from the surface using your fingers (a rolling motion with the side of your thumb works well). If the adhesive will not completely come off, use another Glue Dot to help lift it. If that does not work, use an adhesive remover such as UN-DU.  

Glue Dots will bond to almost anything – here is a list of some of the surfaces Glue Dots can be used on.

Metal, wood, glass, plastic, paper, drywall, wallpaper, cinder block, photos, cardboard, chipboard, poster board, foam core, laminate, acrylic, and stainless steel.

Please feel free to contact us at info@gluedots.com or call 1-888-458-3368.

Glue Dots are available at a variety of retailers as well as online at www.gluedots.com.  For help finding Glue Dots Brand Products you can also call 1-888-458-3368.

There are options for bonding posters to walls. Removable Glue Squares Dispenser, Poster Glue Dots, Removable Dots, can all be used to instantly secure posters to cinderblock, plaster or drywall without damaging walls.

The number of patterns needed may vary depending on the poster size and the surface of the wall you are hanging it on. Testing is recommended and Glue Dots products may damage some surfaces when applied or removed.

While Glue Dots bond instantly to most clean, dry fabrics, machine washing is not recommended. Use Glue Dots to create a quick, temporary hem on clothing or for no-sew craft projects that do not require washing.

Some substances, such as oils, dust, moisture and hand lotions, can interfere with the bonding quality. Always make sure surfaces are clean and dry before using. (Note:  isopropyl alcohol may be used to clean most surfaces prior to applying the adhesive)

Glue Dots are designed to create a permanent bond to most surfaces, such as paper. To remove Glue Dots from hard or non-porous surfaces, first try lifting it from the surface using your fingers (a rolling motion with the side of your thumb works well). If the adhesive will not completely come off, use another Glue Dot to help lift it. If that does not work, use an adhesive remover such as UN-DU. 

Our adhesives are not water-based, therefore they will not dry, yellow or crack over time.

Glue Dots quantities vary depending upon the size, thickness, and packaging type. Please visit the “View Products” page to learn more about our products.

Yes. We have products that provide a strong but temporary bond to most surfaces – Removable Glue Squares Dispenser, Poster Glue Dots, Removable Dots.  These products are great for posting notes or hanging seasonal or party decorations as well as holding rugs in place and for help with DIY and home repair projects.